Saturday, July 30, 2016

DIY installing new closet doors

So these are the closet doors we had when we bought the house. They originally had mirrors in them, but I am assuming that they broke like the ones we had downstairs in our bedroom (the mirror shattered 😬 oops). 


It took us a while to get them off, but after unscrewing every single screw we could find, we were able to scoot the bottom track outwards away from the doorway and then lift the doors up and off. 

And we were left with this:


The new doors were a little bit too long because home depot was super expensive for "custom" sizes so we bought a longer length track and decided to cut it down to size. 

After struggling a bit with a dull hack saw, Brad was able to use the Sawzall to make the cut. 


^^^ that was the cut! 

So once that was off, Brad and his dad put the doors into place by following the simple directions given with the track. 

And here is the finished product! 

 
Definitely a fresh look for the room!




No comments:

Post a Comment